- Description
- Specificatie's
- measuring
- Delivery time
- Exchanges & Returns
Bimini top sailing boat with stay passage / sunshade / Boat parasol 3 arches length 180 cm made of stainless steel!
Bimini made of 25 mm stainless steel with stainless steel connectors.This bimini top has a zipper in the middle at the back for the passage of a stay. Available in 10 colors made of Sunbrella luxury acrylic cloth including storage cover with zipper and tension straps. The mounting differs per boat and must be ordered separately!
DELIVERY TIME +/-10 WORKING DAYS.
| TUBES: | Ø25mm marine polished 316L stainless steel tubes |
|---|---|
| FRAME: | Can be disassembled |
| THE BOOK: | 3 |
| CONNECTORS AND SCREWS: | 316 rvs |
| CLOTH | SUNBRELLA PLUS fabric, 100% "outdoor" acrylic fabric dyed in the solution with impermeability corresponding to ISO 7211-1 standards (water-repellent, impermeable, one side coated with acrylic resins). 2 way zipper in the middle of the canvas at the back for the backstay |
| STANDARD ACCESSORIES: | Storage cover with zipper and 1 set of tension straps |
| HEIGHT: | 140cm cm |
| LENGTH: | 180 cm |
The only thing you need to do before ordering the bimini top is to choose the length, height and width of the bimini top that best suits the size of your boat.
The length (B) and height (C) determine how much shade your bimini top will provide.Determine where the bimini top will be secured and what the range of the top will be when you unfold it. Also check where the top comes into the lowered position, at the back of the boat (size D) (You can find this size under the heading Specifications). Make sure that there is enough space at the front and back of the bimini top to mount the mounting eyes on the boat, to which the tension straps of the bimini top are attached.
Using a measuring tape, you can determine what length of bimini top will provide the desired amount of shade on your boat.
The main mounting point (A) is approximately in the middle of the bimini top on both sides of the boat. The flat straight cover plates supplied with the top are designed for mounting on flat surfaces. Optional brackets are available for railing mounting and side plates for side mounting.
After you have determined where the bimini top will be attached to the boat, measure the distance between these mounting points to determine the width (A) of the top you need.
The frame is adjustable in width, so that it can be mounted within the specified range as indicated in the dimensions when you order the bimini top. (see image above) Example for a width size of 150-170 cm: This means that the bimini top can be mounted at a width of 150 to 170 cm.
Choose the width that most closely matches your measurement of the width between the fasteners.
You determine the correct height while you are standing in the boat. If you mount the bimini top on a small boat, do not go too high. If you can just stand up, it is fine. The higher you go, the less shade. Especially on small rubber boats or fishing boats, you usually sit and there is no room to move your seat if it comes into the sun. If you can bend over the bimini top on such boats, that is actually a good thing.
The delivery time is 5-10 working days.
This product is custom made for you per order and therefore cannot be exchanged or returned.
Featured collection
-
Roller jib cover / Genoa cover
Normal price From €289,00Normal priceUnit price per -
Lazybag Maindrop system / Mainsail Storage system
Normal price From €499,00Normal priceUnit price per -
Sail cover, Mainsail cover, Cover
Normal price From €249,00Normal priceUnit price per -
Steering wheel cover
Normal price From €169,00Normal priceUnit price per
